Re-melting behaviour and wear resistance of vanadium carbide precipitating Cr27.5Co14Fe22Mo22Ni11.65V2.85 high entropy alloy

Treutler, Kai GND; Lorenz, Swenja; Wesling, Volker GND

High entropy alloys (HEAs) are among of the most promising new metal material groups. The achievable properties can exceed those of common alloys in different ways. Due to the mixture of five or more alloying elements, the variety of high entropy alloys is fairly huge. The presented work will focus on some first insights on the weldability and the wear behavior of vanadium carbide precipitation Cr27.5Co14Fe22Mo22Ni11.65V2.85 HEA. The weldability should always be addressed in an early stage of any alloy design to avoid welding-related problems afterwards. The cast Cr27.5Co14Fe22Mo22Ni11.65V2.85 HEA has been remelted using a TIG welding process and the resulting microstructure has been examined. The changes in the microstructure due to the remelting process showed little influence of the welding process and no welding-related problems like hot cracks have been observed. It will be shown that vanadium carbides or vanadium-rich phases precipitate after casting and remelting in a two phased HEA matrix. The hardness of the as cast alloy is 324HV0.2 and after remelting the hardness rises to 339HV0.2. The wear behavior can be considered as comparable to a Stellite 6 cobalt base alloy as determined in an ASTM G75 test. Overall, the basic HEA design is promising due to the precipitation of vanadium carbides and should be further investigated.

Zitieren

Zitierform:

Treutler, Kai / Lorenz, Swenja / Wesling, Volker: Re-melting behaviour and wear resistance of vanadium carbide precipitating Cr27.5Co14Fe22Mo22Ni11.65V2.85 high entropy alloy. 2021.

Zugriffsstatistik

Gesamt:
Volltextzugriffe:
Metadatenansicht:
12 Monate:
Volltextzugriffe:
Metadatenansicht:

Grafik öffnen

Rechte

Nutzung und Vervielfältigung:

Export